PRODUCTS CATEGORY
For over 40 years, VML has specialized in precise environmental control solutions, servicing Industrial, Life Science, Bio-Pharma and Health applications across Canada. We are pleased to provide products and solutions to a diverse clientele, aiding in Research, Development, Manufacturing, and full scale Production Processes.
CLEAN ROOMS/CLEAN ROOM SYSTEMS
Design-Aire Fan Filter Unit
< BACK
ABOUT
The Design-Aire SL is best selling fan-filter unit. The “slim line” housing is designed to fit into tight ceiling spaces, where many competing models could not be installed. The entire series of Design-Aire fan-filter units come standard with many beneficial features.
KEY FEATURES
Easy Installation
-
The 11.5” height and light-weight housing of these units make them easier to slide into ceilings. The 3-prong electrical cord allows them to be plugged into standard 115V outlets.
HEPA Duration
-
The variable speed control helps increase HEPA filter life, by allowing the motor speed to be increased as the loading on the filter increases. This keeps the airflow consistent and results in fewer filter changes.
Energy Costs
-
Each unit only uses a maximum of 2.16 amps on 4' units.
Convenient Connections
-
A 115V duplex electrical outlet located in the filter housing allows up to 5 units to be connected and run from one 15 amp circuit.
STANDARD FEATURES
-
High Efficiency Particulate Air (HEPA) filter rated 99.99% efficient at 0.3 microns
-
Uniform airflow across filter face
-
Durable, light-weight aluminum housing
-
Disposable, quick-change pre-filters, rated MERV 7
-
Less then 64dba noise levels
-
Duplex electrical outlet, 15A, 115V
-
15' power cord, 115V – no hard wiring required
-
Sizes: nominal 2’x2’, 2’x3’ and 2’x4’
-
2 Year Limited Warranty
OPTIONAL FEATURES
-
Painted Aluminum or Stainless Steel housings
-
Ultra Low Penetration Air (ULPA) filter rated 99.9995% efficient at 0.12 microns
-
HVAC collar connections
-
2" pleated pre-filter in place of standard 1"
-
Minihelic Gauge, to monitor filter loading
-
Sound Insulation Package
-
Suspension Package
-
Drywall Installation Flange
-
Tamper Proof Speed Control Cover
-
Remote aerosol injection system
KEY FEATURES
Easy Installation
-
The 11.5” height and light-weight housing of these units make them easier to slide into ceilings. The 3-prong electrical cord allows them to be plugged into standard 115V outlets.
HEPA Duration
-
The variable speed control helps increase HEPA filter life, by allowing the motor speed to be increased as the loading on the filter increases. This keeps the airflow consistent and results in fewer filter changes.
Energy Costs
-
Each unit only uses a maximum of 2.16 amps on 4' units.
Convenient Connections
-
A 115V duplex electrical outlet located in the filter housing allows up to 5 units to be connected and run from one 15 amp circuit.
STANDARD FEATURES
-
High Efficiency Particulate Air (HEPA) filter rated 99.99% efficient at 0.3 microns
-
Uniform airflow across filter face
-
Durable, light-weight aluminum housing
-
Disposable, quick-change pre-filters, rated MERV 7
-
Less then 64dba noise levels
-
Duplex electrical outlet, 15A, 115V
-
15' power cord, 115V – no hard wiring required
-
Sizes: nominal 2’x2’, 2’x3’ and 2’x4’
-
2 Year Limited Warranty
OPTIONAL FEATURES
-
Painted Aluminum or Stainless Steel housings
-
Ultra Low Penetration Air (ULPA) filter rated 99.9995% efficient at 0.12 microns
-
HVAC collar connections
-
2" pleated pre-filter in place of standard 1"
-
Minihelic Gauge, to monitor filter loading
-
Sound Insulation Package
-
Suspension Package
-
Drywall Installation Flange
-
Tamper Proof Speed Control Cover
-
Remote aerosol injection system
Design-Aire Fan Filter Unit
ABOUT
The Design-Aire SL is best selling fan-filter unit. The “slim line” housing is designed to fit into tight ceiling spaces, where many competing models could not be installed. The entire series of Design-Aire fan-filter units come standard with many beneficial features.
